Edge Rebel 80 V3 Magazine Bar Loader, New

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Bar Diameter Capacity: 8 mm to 80 mm (.315” to 3.15”)
Maximum Bar Length: 60” (not to exceed spindle length)
Magazine Rack Capacity: 711mm (28”)
Bar Loading Cycle Time: 20 seconds
Power Consumption: 1 kW/1.5 kVA
Operating Voltage: 230V/60Hz 3-phase
Control Voltage: 24V DC
Spindle Center Height: 875mm – 1350mm (34.5” – 53.125”)
Bar Weight: 125 LBS per bar (1250 lbs. magazine max.)

Machine Dimensions: 82" x 40
Machine Weight: 1,100 lbs

Standard Features
•Bar diameter capacity: 8 mm to 80 mm (.315” to 3.15”)
•Bar length capacity: 60” (spindle length determines max bar length)
•Magazine capacity is 30” linear inches
•Schneider PLC controller—powerful & user friendly
•Automatically adjusts for bar diameter & part length
•Automatically adjusts pusher thrust for bar size
•Soft load material presentation
•Complete setup in 3 minutes
•Accurate positioning without a mechanical stop
•Spindle liner storage included on rear of stand

Standard Accessories
•All electric operation – no shop air required
•Fixed piece feed-out and sub-spindle mode
•Touch screen control (HMI)
•Program memory for 300 specific jobs
•Return and wait function (reduces bar change time by 30%)
•Standard X axis axial shift (Z axis optional)
•With fold up feature
•Includes 10mm and 19mm pushers
•Lathe spindle speed can be maximized
•Material can be round, hexagonal or shaped
•Material length can be uniform or random

Rebel 80 Servo V3:....................................................................$20,700.00
Rebel 80 V3 Slug Load Version:........................................................$25,200.00
Installation:.........................................................................$3,000.00

Optional Accessories
Lathe spindle liner (Liner size determined by customer):..............................$780.00
Dual channel safety kit:..............................................................$500.00
6 mm pusher for diameters of 8 – 10mm:................................................$420.00
V-Tray Kit (required on lathes that have gap between sheet metal & spindle):..........$600.00
Extended V-Tray Kit (required on lathes that have gap between sheet metal & spindle): $1,650.00
High Voltage Kit (required for some lathes):..........................................$750.00
Serial Interface Ethernet Connection with Embedded PC:................................$1,800.00
XL Pusher Kit—adds 500 mm to pusher length:...........................................$2,400.00
Tall Stands for lathes with spindle center greater than 1250mm:.......................$1,350.00
Tall Stand Risers – required with tall stands when lathe center height exceeds 1350mm:$1,200.00
Coolant Collector Extension Kit (required with extended liner):.......................$550.00

Installation:
We recommend that an Edge Technologies authorized technician perform the installation, verification, and training on your bar feeder system.
The $3,000 (Canada & Mexico: $3,300 USD) is a net price and is a “per trip” price.
To achieve effective and comprehensive training and run-off, it is advised that the lathe be tooled up, program ready, and capable of making parts prior to arrival of Edge Technologies’ Service Technician.
Return visits due to post run-off reinstallations or a lack of customer and/or dealer readiness will be billed at $125.00/hour labor and $85.00/hour travel plus expenses.

Warranty & Lifetime Support:
Edge Technologies’ Bar feeders come with a one-year parts and labor warranty.
Edge Technologies provides free phone support to the original owner as long as you own the equipment.

Interfacing of Bar Feeder to CNC Lathe:
The Rebel 80 requires that the lathe OEM or dealer has installed their lathe with an authentic magazine bar feeder interface.
Among other safety features, the lathe must be capable of opening and closing the chuck in automatic mode via m-codes.
Upon request Edge Technologies will forward an interface diagram and signal timing chart.
Interface connection and the supply of the appropriate interface is the responsibility of the CNC lathe supplier.