| X-Axis | 40.1" |
| Y-Axis | 20.8" |
| Z-Axis | 20" |
| # Axis | 3 |
| Power | 20 hp |
| RPM | 10,000 RPM |
| Taper | 40 |
| # ATC | 24 |
| Table-W | 20.1" |
| Table-L | 47.2" |
| Control | CNC (Fanuc 0i-MF) |
| Dimensions | 107" x 119" x 103" |
| Weight | 13,600 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
Control Fanuc 0i-MF
Table size 47.2" x 20.1"
Max. table load 1,320 lbs.
Travel X / Y /Z travel 40.2" / 20.9" / 20.1" 1,020 / 530 / 510 mm
Spindle Spindle nose to table surface 5.1"~25.2"
Spindle center to column 23.0"
Spindle taper #40 Big Plus –
Spindle speed Belt drive: 10,000 rpm / Direct drive: 10,000 rpm –
Spindle diameter 2.4" 60 mm
Feed rates Rapid traverse (X / Y / Z) 1,417 / 1,417 / 944 ipm
Cutting feed (X / Y / Z) 39.3~393 ipm
Automatic tool changer Tool storage capacity 24+1 arm type –
Tool shank BT40 (Opt. CT40 / DIN40) –
Tool change time (tool-to-tool) 3 sec. –
Pull stud P40T-1 –
Max. tool diameter with adjacent tool 3.1"
Max. tool length 11.8"
Max. tool weight 15.4 lbs.
Machine Dimensions: 125" x 83" x 100"
Chip Pan & Cart Dimensions: 125" x 83" x 30"
Machine Weight: 13,600 lbs.
Manufacturer's Notes: Cost saving VMC for high precision, productivity, and high
speed machining.
High-speed linear ways on all axes that ensure fast linear movement during cutting.
Automatic chip flushing system moves cutting chips to the center and the chip
conveyor delivers them to the chip collector which is located at the rear of the
machine base.
Major parts of the machine are constructed with high-quality cast iron which offers
superior stability.
Servo motor coupling is directly linked with the screw to ensure machining accuracy.
FACTORY BROCHURE
https://www.chevalierusa.com/high-speed-vertical-milling-center-EM1620L.html
