Tsugami S206 CNC Swiss Lathe, New in 2012
CNC Swiss LatheTsugami S206 CNC Swiss Lathe, New in 2012
Fanuc 32i CNC Control
FMB Turbo 2-20 Magazine Bar Feed with Channel Set (Bar Loader Collets Sizes: 3/8”, ½”, 5/8” and ¾”)
5 Live Milling Stations with Live Holder for Each Station
(4) Live Milling Stations on Lower Block
MP Systems 2,000 PSI High Pressure Coolant
Tri-Mist 850 Mist Collector
Static ER16 Holders
Machine & Control Keys
All Available Manuals for Machine and Barfeed
Capacity | 0.75" |
Power | 4.9 hp |
RPM | 10,000 RPM |
Swiss, Chucker or Convertible? | Convertible |
Main Spindle Indexing | Full C |
Sub Spindle Indexing | Full C |
Live Back Working Tools? | Yes |
B-Axis? | No |
Control | CNC (FANUC 32I) |
Dimensions | 83" x 47" x 74" |
Weight | 7,260 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications from Brochure:
Control: Fanuc 32i
No. of Controllable Axes: 8
(X1, Z1, Y1, X2, Y2, Z2, C1, C2)
Max Bar Diameter: 20mm (3/4")
Max Machining Length: 210mm (Direct Drive Rotary GB)
250 (Static Guide Bushing)
80mm (Carrier Type Rotary GB)
45mm Bushingless
Max Drilling Diameter: 10mm
Max Tapping Diameter: M8
Deep Hole Drilling Diameter: 8mm
Max Back Spindle Chucking diameter: 20mm
Max Back Spindle Drilling Diameter: 8mm
Max Back Spindle Tapping Diameter: M6
Max Tool Spindle Drilling Diameter: 6mm (front tool post/back tool post)
8mm (rear tool post)
Max Tool Spindle Slotting Diam: 30mm (T1)
Main Spindle Speed: 200 - 10,000 rpm
Back Spindle Speed: 200 - 12,000 rpm
Rotary Guide Bushing: 200 - 8000 (carrier type)
200 - 12000 (direct drive type)
Tool Spindle Speed: 200 - 8000 rpm
Tool Storage Capacity (std/max): 24 pcs / 35 pcs
Tool Size: 12 x 12 x 100 mm
Rapid Traverse rate: 32 m/min
(X1, Y1: 24 m/min)
(Y2: 15 m/min)
Main Spindle: 2.2 / 3.7 kW
Back Spindle: 1.5 / 2.2 kW
Tool Spindle: 0.75 / 1.1 kW (Front tool post)
1.0 kw (rear tool post)
X1-X2-Z1-Z2-Y2 Axes 0.5 kw
Y1 axis: 0.75 kW
Lubricating Pump: 3 W
Power Source Requirements: 14.3 kVA
Compressed Air Requirement: 0.4 MPa or above
Air Discharge rate: 40 NL/min
Machine Weight (approx): 3200 kg (7055 lbs)
Machine Dimensions (approx): 2110 x 1200 x 1885 mm (83" x 47" x 74")
Barfeed Dimensions & Weight: 180" x 24" x 56" - 1,300 lbs
High Pressure Coolant Dimensions & Weight: 40" x 26" x 30" - 400 lbs